• New
BTR300-HD
search
  • BTR300-HD
  • BTR300-HD

BTR300-HD

Suggested retail price: €69.00
Tax included

AMPIRE Bluetooth Receiver

Quantity

CONNECTIONS
- Sound output: 3.5mm jack plug 
- Power supply: USB input (5 VDC)

EQUIPMENT:
- splash-proof, marine certified
- automatic power on
- QDL licensed Bluetooth® 5.0 
- A2DP in highest EDR specification 
- aptX(TM) audio codec from Qualcomm®.
- BT audio streaming also of lossless files such as Wave, Flac, Lossless, etc.
- 3.5mm jack plug with 1.0V signal output
- SSID display name: BTR300-HD
- 10m range

SMARTPHONE COMPATIBILITY
- Android (Bluetooth® and Bluetooth® aptX(TM))
- Apple iOS (Bluetooth®)

OPTIONAL ACCESSORIES
55100-KLINKE AMPIRE interference suppression filter

TECHNICAL DATA:
- Voltage: 5 Volt DC
- Power consumption: <45mA 
- Bluetooth® 5.0
- aptX(TM) audio codec from Qualcomm®.
- Frequency range: 20Hz-20kHz
- Encoding: Low Complexity Subband Codec (SBC)
- Bit rate: up to 384 kbps (48 kHz sampling)
- Audio output voltage: 1V RMS
- Bluetooth® 4.0 / transmit power <10mW EIRP and aptX
- Cable length: 300mm
- Housing dimensions: height: 20mm, width: 65mm, length: 50mm

BLUETOOTH® APPROVAL:
- Declaration ID D068331
- Referenced Qualified Design ID 173056
- Listing Date 2024-04-18

PAIR A DEVICE:
- make sure Bluetooth® is switched on in your device
- switch on the ignition
- the LED (6) flashes blue (pairing mode)
- select "BTR300-HD" in the Bluetooth® menu of your device to connect
- after successful connection, the LED lights up continuously and a single beep sounds over the audio system.

NOTE:
- up to 9 devices can be connected to the BTR300-HD, but only one device can stream music at a time
- The BTR300-HD always remembers the last tuned device and connects automatically after power on.
- a connection to another device must be done manually, as described above
- if the connected device is out of range for more than one minute, the connection is automatically interrupted and the BTR300-HD goes into pairing mode [the LED (6) flashes].
- can only be used in vehicles and not in continuous operation

OPERATION:
- all settings, such as volume, music selection and play/pause are made on your unit
- the BTR300-HD can be installed out of sight as it has no controls or buttons to operate.


LEGAL NOTICE
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Used with permission of the owner. aptX is a trademark of Qualcomm Technologies International, Ltd. registered in the United States and other countries. Used with permission of the owner. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Ampire Electronics GmbH&Co.KG is under license. Other trademarks and trade names are those of their respective owners.

Technical Data

Brand
Ampire
Reference
AMBTR300-HD
Voltage
USB
Connector type
3,5 mm Jack
Product Type
Bluetooth Receiver
EAN13
4260052641408