BTR200-HD

If you want to listen to your music, audio books or navigation from your Apple iPhone or Android smartphone wirelessly via Bluetooth® in maximum sound quality in your car, then the Bluetooth® receivers of the BTR series with aptX are the solution. You can upgrade to wireless A2DP Bluetooth audio streaming on most navigation and car stereo systems with Ampire's Bluetooth receivers. 

The connection is easily set up and automatically restored via Bluetooth®. The BTR series uses the Bluetooth® protocol for headphones on your smartphone and does not affect the functionality of your Bluetooth® hands-free car kit. 

The BTR200-HD Bluetooth® receiver is designed for navigation and car radio systems with a 3.5 mm jack input and an on-board power supply of 12 volts. 

Bluetooth® listening in CD quality with aptX(TM)?
As an alternative to standard Bluetooth®, we also have receivers with the Bluetooth® aptX(TM) codec. This codec is becoming more and more popular. If you use devices with the aptX(TM) standard, you can significantly improve the sound quality of your Bluetooth® streams. 

What does Bluetooth® aptX(TM) improve?
The aptX® codec uses a more efficient method of compressing audio data that makes better use of the available bandwidth. The prerequisite for aptX® streams is that the playback device as well as the transmitter also support Bluetooth® aptX(TM). The function can be recognised by the aptX(TM). lettering on the device. The codec supports the common audio formats such as MP3 and FLAC. 

Which smartphones support Bluetooth® aptX(TM)?
Not all Android smartphones support the Bluetooth® codec aptX(TM). You can check whether your Android smartphone is compatible in the technical data of your smartphone. An Apple iPhone does not support the Bluetooth® codec aptX(TM).


CONNECTIONS
- Sound output: 3.5mm jack plug 
- Power supply: +12V ignition (ACC/K15) with fuse 2A 
- Remote output: Blue cable +12VDC/20mA 

EQUIPMENT
- 3.5mm jack plug with signal output 1.0V
- splash-proof, marine certified
- automatic power on
- Automatic remote output (+12V DC)
- QDL licensed Bluetooth® (QCC3034) 
- A2DP in highest EDR specification 
- aptX(TM) HD, aptX(TM), aptX(TM) Low Latency, SBC and AAC audio codec from Qualcomm®.
- BT audio streaming of lossless files such as Wave, Flac, Lossless, etc.
- SSID display name: BTR200-HD
- 10m range

SMARTPHONE COMPATIBILITY
- Android (Bluetooth® and Bluetooth® aptX(TM))
- Apple iOS (Bluetooth®)

OPTIONAL ACCESSORIES
55100-KLINKE AMPIRE interference suppression filter

TECHNICAL DATA:
- Voltage: +12V DC
- Current consumption including remote output: <65mA 
- Voltage/current remote output: +12V DC, max.20mA
- Bluetooth V5.0
- QCC3034 chip
- aptX(TM) HD, aptX(TM), aptX(TM) Low Latency, SBC and AAC audio codec from Qualcomm®.
- Frequency range: 20Hz-20kHz
- Encoding: Low Complexity Subband Codec (SBC)
- Bit rate: up to 384 kbps (48 kHz sampling)
- Audio output voltage: 1V RMS
- Bluetooth 5.0 / Transmit power <10mW EIRP and aptX
- Housing dimensions: Height: 20mm, Width: 65mm, Length: 50mm
- Red cable: +12V (0.459mm² or 26x 0.15mm), 305mm length
- Black cable: ground (0.459mm² resp. 26x 0.15mm), 305mm length
- Blue cable +12VDC/20mA (0.459mm² resp. 26x 0.15mm), 305mm length

BLUETOOTH APPROVAL:
- Declaration ID D068331
- Referenced Qualified Design ID 173056
- Listing Date 2024-04-18

TEACH IN DEVICE:
- make sure Bluetooth is switched on in your device
- switch on the ignition
- the LED (6) flashes blue (pairing mode)
- Select "BTR200-HD" in the Bluetooth menu of your device to connect.
- after successful connection, the LED lights up permanently and a single beep sounds over the audio system