AMPIRE KVA-IVECO

High-resolution AHD reversing camera KVA-IVECO which is mounted in place of the factory brake light housing. Infrared lighting is integrated into the camera housing to ensure sufficient illumination even in the dark. 

Suitable for:
Iveco Daily 6 2014-2022 or identical vans


TECHNICAL DATA
- Video standard AHD 1080P 25F
- Image sensor: GC2053 (FH8536H) 
- Image sensor size 1/2.9
- Resolution 1920x1080 pixels
- 3D noise reduction
- Sequential scanning
- Minimum illumination: 0.01 lux
- Infrared illumination for night vision
- Signal-to-noise ratio >43dB
- Automatic white balance
- Image reproduction horizontally mirrored/normal
- Guide lines: switched on (can be switched off by disconnecting cable loop)
- Horizontal viewing angle 125°
- Vertical viewing angle 70°
- Diagonal viewing angle 165°
- Camera head vertically adjustable up to 20°
- Protection class IP68 waterproof
- Operating voltage: 12 Volt DC
- Power consumption: max. 250mA max
- Operating temperature: -20° to 70°C
- Color: black 
- Cable length: 10 meters with 4-pin MINI-DIN plugs
- E approval E9-10R-05.1652
- CE approval EN 55022: 2010; EN 61000-3-2:2006+A1:2009+A2:2009; EN61000-3-3:2008; EN 55024:2010
- FCC approval ANSI C63.4-2003

SCOPE OF DELIVERY
Rear view camera with housing
AK1037 Power supply unit with blue plugs
AK1039 Mini-DIN extension cable 10m with blue plugs 

IMPORTANT NOTE
Depending on the roof structure and the trailer coupling installed on the vehicle, it may not be possible to see the trailer coupling on the monitor.

NOTE ON ORDERING
This camera is a high-resolution AHD camera with 1080P resolution and 25 images/second. This camera can only be connected to compatible monitors, car radios or interfaces. If the camera input on your monitor can only display a video signal in CVBS, FBAS or NTSC, this AHD camera is unsuitable and you should use the identical CVBS camera with NTSC video signal.