AMPIRE KV-UNIVERSAL

Universal brake light reversing camera with microphone. Infrared lighting is integrated into the camera housing, which ensures sufficient illumination even in the dark.

TECHNICAL SPECIFICATIONS

- Fastening screws accessible from the front

- Mirrored image reproduction

- Auxiliary lines: switched on at the factory (can be switched off by separating a cable loop)

- Image sensor: "CMOS PC7070

- Resolution 648x488 pixels

- Viewing angle 170 ° diagonally

- Viewing angle 120 ° horizontally

- vertical adjustability of the camera 20 °

- Picture format: NTSC

- 580 lines of resolution

- IP68 waterproof

- Integrated infrared lighting

- Integrated microphone

- Operating voltage: 9-16 volts DC

- Power consumption: max. 150mA

- Operating temperature: -30 ° to 70 ° C

- Minimum lighting: 0 lux

- Color: Black

- Cable length: 10 meters

- E approval E9-10R-05.1652

- CE approval EN 55022: 2010; EN 61000-3-2: 2006 + A1: 2009 + A2: 2009; EN61000-3-3: 2008; EN 55024: 2010

- FCC approval ANSI C63.4-2003

DIMENSIONS

- Total width: 211.7mm

- Brake light width: 199.7mm

- Length: 62mm

- Height: 62.7mm

- Hole spacing: 166mm

INSTALLATION NOTE

- The camera is not suitable for continuous operation or monitoring. It must not be operated with an ignition (K15), as this could damage the camera through overheating.

- Depending on the roof structure and the trailer coupling installed on the vehicle, you may not be able to see the trailer coupling on the monitor.

- In the case of mobile homes and other special structures, the installation of the camera can be much more complex or not possible.