AMPIRE KV-CRAFTER-2
AMPIRE camera for VW Crafter 2 or MAN TGE
Vehicle-specific reversing camera for the Volkswagen Crafter 2 or the identical MAN TGE from model year 2017. The camera is mounted over the factory brake light glass. In the second generation of this camera, an improved camera chip with a significantly higher resolution was used.
TECHNICAL SPECIFICATIONS
- Mirrored image reproduction
- Auxiliary lines: switched on at the factory (can be switched off by separating a cable loop)
- Image sensor: CMD-III. "High performance digital super clarity image sensor
- Resolution 648x488 pixels
- Viewing angle 170 °
- vertical adjustability of the camera 20 °
- Picture format: NTSC
- 580 lines of resolution
- IP68 waterproof
- Integrated infrared lighting for perfect night vision
- Operating voltage: 9-16 volts DC
- Power consumption: max. 150mA
- Operating temperature: -30 ° to 70 ° C
- Minimum lighting: 0 lux
- Color: Black
- Cable length: 10 meters
- E approval E9-10R-05.1652
- CE approval EN 55022: 2010; EN 61000-3-2: 2006 + A1: 2009 + A2: 2009; EN61000-3-3: 2008; EN 55024: 2010
- FCC approval ANSI C63.4-2003
INSTALLATION NOTE
The camera is not suitable for continuous operation or monitoring. It must not be operated with an ignition (K15), as this could damage the camera through overheating.
IMPORTANT NOTE
Depending on the roof structure and the trailer coupling installed on the vehicle, you may not be able to see the trailer coupling on the monitor.
Technical Data
- Brand
- Ampire
- Reference
- AMKV-CRAFTER-2-2G
- Voltage
- 12 V
- Camera type
- Brake Light
- Connector type
- Aviation 4 pin
- IP rating
- IP68
- Car Brand
- MAN
Volkswagen - Car Model
- Crafter
TGE - Cable Length
- 10 m
- Resolution
- 648x488
- EAN13
- 4260052640012