AMPIRE KV TRANSIT 4G

Vehicle-specific reversing camera for the FORD Transit Bus 7th generation (Bj. 2014-2019) with medium-high roof H2. The KV-TRANSIT-4G is simply exchanged for the factory brake light glass. Infrared lighting is integrated into the camera housing, which ensures sufficient illumination even in the dark. In the fourth generation of this camera, an improved camera chip with significantly higher resolution and better white balance is used.

TECHNICAL SPECIFICATIONS

- Mirrored image reproduction

- Auxiliary lines: switched on at the factory (can be switched off by separating a cable loop)

- Image sensor: "CMOS PC7070

- Resolution 648x488 pixels

- Viewing angle 170 ° diagonally

- Viewing angle 120 ° horizontally

- vertical adjustability of the camera 20 °

- Picture format: NTSC

- 580 lines of resolution

- IP68 waterproof

- Integrated infrared lighting

- Integrated microphone

- Operating voltage: 9-16 volts DC

- Power consumption: max. 150mA

- Operating temperature: -30 ° to 70 ° C

- Minimum lighting: 0 lux

- Color: red / black

- Cable length: 10 meters

- Length of lamp glass 385mm

- Width of lamp glass 50mm

- E approval E9-10R-05.1652

- CE approval EN 55022: 2010; EN 61000-3-2: 2006 + A1: 2009 + A2: 2009; EN61000-3-3: 2008; EN 55024: 2010

- FCC approval ANSI C63.4-2003

INSTALLATION NOTE

The camera is not suitable for continuous operation or monitoring. It must not be operated with an ignition (K15), as this could damage the camera through overheating.

The camera is not suitable for the Transit Custom Nugget. The plug of the 3rd brake light cannot be plugged in.

IMPORTANT NOTE

Depending on the roof structure and the trailer coupling installed on the vehicle, the trailer coupling cannot be viewed on the monitor.

Replaces the predecessor

- kv transit

- KV-TRANSIT