AMPIRE KV VITO 2G
Suggested retail price:
€189.00
Tax included
AMPIRE camera for Mercedes Vito (W447)
Vehicle-specific reversing camera for the Mercedes-Benz Vito 2016 (W447) with tailgate. The KV-VITO-2G is simply exchanged for the factory brake light glass. In the second generation of this camera, an improved camera chip with a significantly higher resolution and higher light sensitivity was used.
TECHNICAL SPECIFICATIONS
- Mirrored image reproduction
- Image sensor: CMD-III. "High performance digital super clarity image sensor
- Resolution 648x488 pixels
- Viewing angle 170 °
- Picture format: NTSC
- 580 lines of resolution
- IP68 waterproof
- Operating voltage: 9-16 volts DC
- Power consumption: max. 150mA
- Operating temperature: -30 ° to 70 ° C
- Minimum lighting: 0 lux
- Cable length: 10 meters
- E approval E9-10R-05.1652
- CE approval EN 55022: 2010; EN 61000-3-2: 2006 + A1: 2009 + A2: 2009; EN61000-3-3: 2008; EN 55024: 2010
- FCC approval ANSI C63.4-2003
INSTALLATION NOTE
The camera is not suitable for continuous operation or monitoring. It must not be operated with an ignition (K15), as this could damage the camera through overheating.
IMPORTANT NOTE
Depending on the roof structure and the trailer coupling installed on the vehicle, you may not be able to see the trailer coupling on the monitor. This article does not fit vehicles with rear doors.
Technical Data
- Brand
- Ampire
- Reference
- AMKV-VITO-2G
- Voltage
- 12 V
- Camera type
- Brake Light
- Connector type
- Aviation 4 pin
- IP rating
- IP68
- Car Brand
- Mercedes
- Car Model
- Vito
- Cable Length
- 10 m
- Resolution
- 648x488
- EAN13
- 4260052639795
AMPIRE camera for Mercedes Vito (W447)