AMPIRE KV-BERLINGO
AMPIRE camera for Citroën Berlingo 3, Peugeot Rifter, Opel Combo E, Toyota ProAce City
Vehicle-specific reversing camera to replace the factory brake light glass. Suitable for the following vehicles:
- Citron Berlingo 3 (from model year 2018)
- Opel Combo E (from model year 2018)
- Peugeot Rifter (from model year 2018)
- Toyota Proace City (from model year 2020)
TECHNICAL SPECIFICATIONS
- Mirrored image display
- Image sensor: CMD-III. "High performance Digital Super Clarity Image Sensor
- Resolution 648x488 pixels
- Viewing angle 170°
- Picture format: NTSC
- 580 lines resolution
- IP68 waterproof
- Operating voltage: 9-16 volts DC
- Current consumption: max. 150mA
- Operating temperature: -30° to 70°C
- Minimum illumination: 0 lux
- Cable length: 10 meters
- E approval E9-10R-05.1652
- CE approval EN 55022: 2010; EN61000-3-2:2006+A1:2009+A2:2009; EN61000-3-3:2008; EN55024:2010
- FCC approval ANSI C63.4-2003
INSTALLATION NOTE
The camera is not suitable for continuous operation or surveillance. It must not be operated with ignition (K15), as this could damage the camera through overheating.
IMPORTANT NOTE
Depending on the roof structure and the towbar installed on the vehicle, you may not be able to see the towbar on the monitor. This article does not fit vehicles with rear doors.
Technical Data
- Brand
- Ampire
- Reference
- AMKV-BERLINGO
- Voltage
- 12 V
- Camera type
- Brake Light
- Connector type
- Mini 8 pin
- IP rating
- IP68
- Car Brand
- Citroen
Opel
Peugeot
Toyota - Car Model
- ProAce
- Cable Length
- 10 m
- Resolution
- 648x488
- EAN13
- 4260052639818