AMPIRE KV-KANGOO

Vehicle-specific reversing camera to replace the factory-fitted brake light glass. Suitable for the following vehicles: 
- Renault Kangoo 2007-2021 with hinged doors (no tailgate).
- Mercedes-Benz Citan 2012-2021 with gullwing doors (no tailgate)

TECHNICAL DATA
- Mirrored image
- Image sensor: CMD-III. " High performance Digital Super Clarity Image Sensor 
- Resolution 648x488 pixels
- Viewing angle 170
- Picture format: NTSC
- 580 lines Resolution
- IP68 waterproof
- Operating voltage: 9-16 Volt DC
- Power consumption: max. 150mA
- Operating temperature: -30° to 70°C
- Minimum illumination: 0 Lux
- Cable length: 10 metre cable with 4-pin MINI-DIN connectors
- E approval E9*10R06/00*22328*00
- CE approval EN 55022: 2010; EN 61000-3-2:2006+A1:2009+A2:2009; EN61000-3-3:2008; EN 55024:2010
- FCC Approval ANSI C63.4-2003

SCOPE OF DELIVERY
Brake light Rear view camera
AK1001
AK1014
AK1016 Connecting cable 4-pin Mini-DIN, with 3.3V power supply, 10m

INSTALLATION NOTE
Insert a W5W bulb into the socket provided (included). Otherwise the brake light will be displayed as defective in the on-board computer. 
The camera is not suitable for continuous operation or monitoring. It must not be operated with ignition (K15), as this could damage the camera by overheating.
Do not use the original W21W bulb, as the camera may be damaged by overload.

IMPORTANT NOTICE
Depending on the roof structure and the trailer hitch installed on the vehicle, it may not be possible to see the trailer hitch on the monitor. This item does not fit vehicles with rear doors.