APS 8 R
Audison 200 mm subwoofer
Audison APS 8 R - Subwoofer
With the aim of providing high acoustical output even when used with lower power, the APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz.
Technical Data:
Component | subwoofer |
Size | 200 mm (8″) |
Power Handling | 250 W Continuous Power 500 W Peak Power |
Depth | 79 mm |
Impedance | 4 Ω |
Frequency Response | 30 – 300 Hz |
Sensitivity | 84 dB/Spl |
Xmax | +/- 8,8 mm |
FS | 32 Hz |
Voice coil woofer | 40 mm |
Speaker grill | Included |
Features:
The APS 8 R has been specifically developed to be combined with either the AP8.9 bit or AP4.9 bit / AP4 D. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the “rocking-mode” phenomenon.
The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.
Attachments:
APS 8 R Tech Sheet
APS 8 R Manual
Technical Data
- Brand
- Audison
- Reference
- AUAPS8R
- Speaker Size
- 8"
- Impedance
- 4 Ω
- Watt RMS
- 250 w
- Watt peak
- 500 w
- Sensitivity
- 84 dB/Spl
- Mounting Depth
- 79 MM
- Subwoofer Type
- Without Enclosure
- EAN13
- 8018823120609
You might also like